Eric, I emailed Daniel that same question and this was his response:
"You should have no problem with clearance above your tire, but there’s no real downside to having the rack that’s a little tall other than aesthetics. The difference between the two rack sizes is only about an inch, we mainly do the two sizes to accommodate bikes with big wheels and low rack mounts where there might be clearance issues with the tire. " Regarding the says, I trimmed mine and it looks great. Josh in NYC On Wed, Jul 28, 2021, 12:52 PM Ginz <theg...@gmail.com> wrote: > Hello, > > Has anyone tried to fit the Tumbleweed T-Rack or Pannier Rack (355mm deck > height?) on a Hunqapillar or similar 26" fork using the bosses on top of > the fork crown? > > I'm wondering if that would work. Some bending of the rack stays might be > required by I can't tell if the stays' mounting block would be at the right > height. > > I have a Nitto 32F on there but might try something new. > > Thanks for any advice. > > Eric > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/28af37ce-b13b-4f43-ace9-e9c855c17a4en%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/28af37ce-b13b-4f43-ace9-e9c855c17a4en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAJua_7ArJ8DjZFR12F%3Drqq2UDdmaRsEbOxG_BCr%3DOcWGybof%3Dg%40mail.gmail.com.
