I don’t have anything that will work with a 42 tooth rear but a 2x configuration definitely has my attention.
Ray On Saturday, August 28, 2021 at 5:34:33 PM UTC-7 Joe Bernard wrote: > The Blahg is back up. Casette uses 7-speed spacing (Grant's words) which > should (my words) nominally index with a Shimano 8 shifter and normal > matching derailer. But I don't know if the teeth will be indexy twisty, I > don't presume Riv is pushing hard to make this thing work with anything > other than friction shifters. > > Joe "wildly guessing" Bernard > > On Saturday, August 28, 2021 at 3:17:20 PM UTC-7 Joe Bernard wrote: > >> It's intended to work with the new RapidRise (low-normal) derailer Grant >> is working on. But if we have something in a drawer that'll work with the >> 42t cog I say give it a whirl! >> >> >> >> On Saturday, August 28, 2021 at 2:54:02 PM UTC-7 Ray Varella wrote: >> >>> Thanks Joe, >>> ….so which derailer will we use with these? I say “we” because you may >>> be just as likely to run one as I will. >>> >>> Cheers >>> Ray >>> >>> On Saturday, August 28, 2021 at 11:41:16 AM UTC-7 Joe Bernard wrote: >>> >>>> 13-42 which will mount on a 8/9/10 hub with a spacer Riv will provide >>>> (you would use it with the included spacer most 11-speed hubs offer, too). >>>> Intended for friction shifting and will use Riv's own 7-speed chain but an >>>> 8 (and probably 9) will work, too. No idexing compatibility was mentioned >>>> but I would imagine/hope this would work with Shimano 8-speed shifters >>>> with >>>> one click locked out. >>>> >>>> The post will probably be back, it was short and sometimes Grant pulls >>>> them back for edits. >>>> >>>> Joe Bernard >>>> On Saturday, August 28, 2021 at 9:13:48 AM UTC-7 Ray Varella wrote: >>>> >>>>> >>>>> In Will’s email yesterday there was a link to a new blugh but there is >>>>> nothing there. >>>>> I had a question about the 7 speed cassette that was alluded to, did >>>>> anyone read about it? >>>>> It looks like a great option, >>>>> Can anyone offer a brief synopsis. >>>>> >>>>> Thank you >>>>> Ray >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/6a097964-3bc9-473d-a30f-81475725811bn%40googlegroups.com.
