Still available are these items 600 derailleur and shift levers, MF-2 hub area rack and Problem Solver center pull/canti cable hanger.
I'm looking for a Shimano 170 XT FC-730 silver crank, or FC-6206, or a Sugino crank of similar aesthetics. Partial trade accepted for MF-2 rack. Mike SLO CA On Sunday, September 26, 2021 at 11:45:52 AM UTC-7 Mike Godwin wrote: > Hi Folks > Thanks for the interest in some items. These are the restite. > Cross-posted to ibob list. > > The Arabesque bits are still available. *Free for cost of shipping* > > The pry bar Viscount crankset is available, get it for the rings and > bolts/nuts.* Free for cost of shipping* > > And the Nitto MF-2 Marks Hub Area Rack with Hoop is still available. How > about *$170 shipped*? Getting into bargain land. > > Problem Solver 1 1/8 front cable hanger. 10 bucks with something else > unless you need it separately, *$15 shipped*. > > Mike SLO CA > > On Friday, September 24, 2021 at 2:52:59 PM UTC-7 Mike Godwin wrote: > >> Hi Folks >> >> Got a few items left over from builds perhaps you are interested. Photos >> compiled into a pdf, ask me if you want the source photos. Cross posted to >> ibob list. >> >> 600 Arabesque FD/RD/Levers - Decent shape, some oxidation here there. I >> put the RD in solvent for a couple of weeks - mineral spirits - and it >> melted the plastic spring cover and stop. *$15 shipped* >> >> Suntour Power Control 7-spd/friction downtube levers. Good condition, I >> have not installed them with cables but index/friction dial works. * $15 >> shipped* >> >> Nitto MF-2, AKA Mark's Hub Area Rack with Hoop. NIP. *$180 shipped* >> >> Problem Solver 1 1/8 front cable hanger. 10 bucks with something else >> unless you need it separately, 15 shipped. >> >> Non-bike. Brunton Pocket Transit Model 5070 - I'm not using this any >> longer except to measure seat tube and head tube angles. Declination >> adjustment, inclinometer, needle induction dampening, long and short >> sighting bits, accuracy to 1/2 degree, if you can read it. $150 shipped. >> >> thanks for looking >> Mike SLO CA >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/4f0fbce6-f263-4774-ae46-b67e19c83d4cn%40googlegroups.com.
