My Chocomoose is currently installed on a 68cm Schwinn Traveler built into a single speed and kind of serving as a placeholder for a build I eventually hope to move over to a RoadUno... atleast the bars/inverse levers, and saddle. I have mine currently slammed, though it's been adjusted at times between slammed and an inch or two of exposed quill and re-slammed again recently while fitting a basket. The frame has a 62.5cm top tube ctc with 73deg parallel angles and honestly not sure how this would correlate or compare to whatever the largest RoadUno geomety will be but I'd anticipate a similarly slammed Chocomoose on my own build with Riv's tall headtubes and some extra standover with slope.
After trying a few different builds I'm really enjoying the uninterrupted grip using the inverse levers on the Chocomoose and definitely plan to try these first. Best, Brian Cole Lawrenceville NJ On Tuesday, March 8, 2022 at 12:14:11 PM UTC-5 Bill Lindsay wrote: > I could pull my Albastache cockpit off my RB1 beater. That's an option. > I did like the ChocoMoose that came on my Appaloosa, but I needed to slam > it to get it low enough. I'll have to look at the numbers... > > BLinEC > > On Tuesday, March 8, 2022 at 8:44:24 AM UTC-8 Johnny Alien wrote: > >> If I wanted a standard drop type of experience I would go with >> Albastache. If I wanted the full sweptback experience the Losco and Choco >> bars are my favorite road sweptback bar. >> >> On Tuesday, March 8, 2022 at 11:27:08 AM UTC-5 tommc...@gmail.com wrote: >> >>> either bullmoose bars, or run some North Road bars upside down... >>> >>> On Tuesday, March 8, 2022 at 9:06:38 AM UTC-7 Bill Lindsay wrote: >>> >>>> There was an Instagram post showing that Riv has prototype samples of >>>> all sizes of RoadUno, inviting us to come test ride them. I just emailed >>>> Will to find out if they really have a 57 ready to test ride for me. Has >>>> anybody ridden one at RBWHQ? >>>> >>>> I haven't seen numbers yet, but since they say "designed for swept >>>> bars" I'm going to take them at their word that I won't be putting drops >>>> on >>>> a RoadUno. I think my urbanscorcher version of a RoadUno might have Riv >>>> Bullmoose bars. What would you run? >>>> >>>> Bill Lindsay >>>> El Cerrito, CA >>>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/c351aa94-940f-442d-9386-8cc5738f5f2dn%40googlegroups.com.
