I figured I was going to ditch the Toscos but instead I really liked them. I am going to give the slightly wider 60cm version a shot. I use Losco bars on my Gallop and I was a bit surprised how different the Tosco bars were. I just assumed they were the same with a bit more rise. Other than the money it takes its a load of fun trying out the different sweptback models. The Bosco and Chocos (and the related moose versions) are the only ones I have not tried.
On Tuesday, March 29, 2022 at 11:53:27 PM UTC-4 Joe A. wrote: > Thanks for the heads up. I've been riding on a bit too big for me XO-3 > with an 80CM stem so will try it out at first. I'm also tempted to try one > of the other sweptback models but will try out the Toscos first. > > On Monday, March 28, 2022 at 8:33:12 AM UTC-7 Johnny Alien wrote: > >> I am in the 80-81 range so I sit in the middle of the 52cm range. Your >> measurement is not at the rock bottom so I think you be fine. With a Clem I >> think its probably better to go a little big then a little small. You will >> likely need a much shorter stem than what's included to bring the bars back >> some. >> >> On Monday, March 28, 2022 at 11:22:02 AM UTC-4 Joseph Albert wrote: >> >>> Thanks so much for the heads up on the Crust stock as well, Johnny. I >>> ended up getting the last 52 cm Lime Green and I'm very excited though I am >>> only now realizing that perhaps, I should've checked out the quirkiness in >>> sizing a bit more. I have a PBH of ~76-77 so I seem to be ok on a 52cm but >>> of course, I'm feeling a tinge of regret at not considering the 45cm. >>> >>> Johnny, are you sized similarly to me? And to the rest of the community, >>> can I rest east knowing that I'll be able to ride this Clem in commuter >>> mode (a.k.a not fast at all). >>> >>> On Thursday, March 24, 2022 at 6:18:09 AM UTC-7 Dee Dee wrote: >>> >>>> Thanks for replies. Ordered the 45 in lime green for her :) >>>> >>>> She road one at Riv hq a few weeks back and loved it. >>>> >>>> >>>> On Thu, Mar 24, 2022 at 7:06 AM Johnny Alien <johnny....@gmail.com> >>>> wrote: >>>> >>>>> @Dee Dee, Rivendell only sells these as completes now. It will likely >>>>> be awhile before these are available through them again. It looks like >>>>> they >>>>> still have both colors in the larger sizes but only one lime green in 45 >>>>> and 52. >>>>> >>>>> On Thursday, March 24, 2022 at 6:56:29 AM UTC-4 Bicycle Belle Ding >>>>> Ding! wrote: >>>>> >>>>>> Jacob, I bet that was my thread. Yes, I was completely shocked. I got >>>>>> a 52 from 2019 after having ridden my mother-in-law’s 1st gen Clementine >>>>>> and they were DIFFERENT BIKES. I have the 52 and had to get a longer bar >>>>>> for the vehicle bike rack and change the stem because the reach was too >>>>>> long. I was frustrated getting it set up because the darn thing was so >>>>>> foreign compared to the bike I knew. BUT I will say that now I adore the >>>>>> Clem. It’s very long but it is my most comfortable bike. Just takes a >>>>>> while >>>>>> to get it set up correctly. >>>>>> Leah >>>>>> >>>>>> On Wednesday, March 23, 2022 at 11:46:12 PM UTC-4 Jacob Lopez wrote: >>>>>> >>>>>>> Dee Dee, I think Clems are going to be available again toward the >>>>>>> fall of this year (?). Someone correct me if I'm wrong. I think >>>>>>> somewhere on the site there was a rough estimate for availabilities >>>>>>> written >>>>>>> on a piece of cardboard or something lol. >>>>>>> >>>>>>> Not sure if this is the place to post this, so let me know if I'm >>>>>>> wrong. And sorry if I'm preaching to the choir, but I just wanted to >>>>>>> share >>>>>>> in case it is useful, because I found it to be useful for my own >>>>>>> edification. But regarding the Clem L's (since I too was searching for >>>>>>> a >>>>>>> great while before I found one) I wanted to say that the early Clem L's >>>>>>> have a shorter wheel base than the more recent ones of the last couple >>>>>>> (few?) years. Apparently they are really different bikes altogether >>>>>>> because of the different wheelbases and slacker headtube (?)! There is >>>>>>> a >>>>>>> great discussion in the group about Riv's expanding wheelbase >>>>>>> throughout >>>>>>> the years especially on the Clem L. >>>>>>> >>>>>>> On Wednesday, March 23, 2022 at 8:15:09 PM UTC-7 Dee Dee wrote: >>>>>>> >>>>>>>> Johnny, thanks for the tip on Crust stock. Tempted to grab a 45 for >>>>>>>> my spouse. >>>>>>>> >>>>>>>> Does anyone know the timeline for Riv to get Clems in again? And do >>>>>>>> they only sell Clem Completes now? Or can you still grab just a frame >>>>>>>> from >>>>>>>> time to time? >>>>>>>> >>>>>>>> -Danny >>>>>>>> >>>>>>>> On Wed, Mar 23, 2022 at 9:42 PM Johnny Alien <johnny....@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Crust listed some complete Clems and I was able to grab one. Since >>>>>>>>> I have some parts I wants to use I am going to be listing up some >>>>>>>>> parts >>>>>>>>> from this soon. If anyone is interested in a silver crankset or the >>>>>>>>> new >>>>>>>>> 650B wheelset on this thing before I list them feel free to hit them >>>>>>>>> up. I >>>>>>>>> am probably going to sell the derailers too because I have an Altus >>>>>>>>> rear >>>>>>>>> that I am eager to try. >>>>>>>>> >>>>>>>>> On Tuesday, March 22, 2022 at 8:00:31 AM UTC-4 Johnny Alien wrote: >>>>>>>>> >>>>>>>>>> I passed the info along about the complete so hopefully someone >>>>>>>>>> from here grabbed it. It was decked out nicely so didn't work for me >>>>>>>>>> with >>>>>>>>>> my stockpile of parts. All taht's to say...still looking! Thanks >>>>>>>>>> >>>>>>>>>> On Saturday, March 19, 2022 at 3:51:20 PM UTC-4 Johnny Alien >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Thanks for that info!! It sounds like I would be in the same >>>>>>>>>>> boat. So I could potentially do a 55 Cheviot but would probably >>>>>>>>>>> prefer a >>>>>>>>>>> 50. For sure don't want to go to a 55 in the Platy >>>>>>>>>>> >>>>>>>>>>> On Saturday, March 19, 2022 at 3:46:03 PM UTC-4 Dorothy C wrote: >>>>>>>>>>> >>>>>>>>>>>> Johnny, the Platy/Cheviot sizing is a bit different in the >>>>>>>>>>>> middle size. The 55 Cheviot is 650b wheel size, but the 55 Platy >>>>>>>>>>>> is 700c. >>>>>>>>>>>> I have a 55 Cheviot and I am 81cm pbh, but I would have been >>>>>>>>>>>> better off on the 50cm Platy had I decided to switch bikes. >>>>>>>>>>>> Will mentioned the size difference somewhere >>>>>>>>>>>> >>>>>>>>>>>> On Saturday, March 19, 2022 at 12:40:03 PM UTC-7 Doug H. wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I think I’d need a 55 but I don’t see a listing for that bike >>>>>>>>>>>>> anywhere. >>>>>>>>>>>>> Doug >>>>>>>>>>>>> >>>>>>>>>>>>> Sent from my iPhone >>>>>>>>>>>>> >>>>>>>>>>>>> On Mar 19, 2022, at 3:31 PM, Johnny Alien < >>>>>>>>>>>>> johnny....@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> I talked to them so more about it but it just doesn't make >>>>>>>>>>>>> sense for me financially right now. Parting it or selling the >>>>>>>>>>>>> parts that I >>>>>>>>>>>>> had set aside for this build would end up with me paying more for >>>>>>>>>>>>> the frame >>>>>>>>>>>>> then I would for a new one. But for someone needing a complete >>>>>>>>>>>>> its a fair >>>>>>>>>>>>> deal. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Saturday, March 19, 2022 at 3:02:29 PM UTC-4 Doug H. wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Is the Platy is Cambridge a 50 or 55? >>>>>>>>>>>>>> Doug >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Saturday, March 19, 2022 at 10:09:15 AM UTC-4 Johnny Alien >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> I got a hot tip from Leah on a Platy in Cambridge however it >>>>>>>>>>>>>>> is being sold as a complete and the price is fair but since I >>>>>>>>>>>>>>> have so many >>>>>>>>>>>>>>> parts its a pain to pay the higher price and try and offload a >>>>>>>>>>>>>>> bunch of >>>>>>>>>>>>>>> parts to compensate. If anyone is interested shoot me a message >>>>>>>>>>>>>>> and I will >>>>>>>>>>>>>>> give you the info. Or if someone wants to buy a bike load of >>>>>>>>>>>>>>> nice Riv >>>>>>>>>>>>>>> pats/wheels etc let me know and maybe we can partner up. >>>>>>>>>>>>>>> Otherwise I am >>>>>>>>>>>>>>> still on the hunt. :) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Friday, March 18, 2022 at 8:31:30 PM UTC-4 Johnny Alien >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I was planning on taking a shot at a Rosco Platy but now it >>>>>>>>>>>>>>>> sounds like they are pushed until May. It's still a solid plan >>>>>>>>>>>>>>>> and I will >>>>>>>>>>>>>>>> wait if need be but I am going to throw out a feeler as well. >>>>>>>>>>>>>>>> Would prefer >>>>>>>>>>>>>>>> just a frame as I have all of the parts but could be fine with >>>>>>>>>>>>>>>> getting one >>>>>>>>>>>>>>>> more complete if its the right thing. I would need a 50 Platy >>>>>>>>>>>>>>>> or Cheviot >>>>>>>>>>>>>>>> (they came in the same sizes right?) or a 52 Clem L. I need >>>>>>>>>>>>>>>> something with >>>>>>>>>>>>>>>> V brakes so I think those are the only step throughs that use >>>>>>>>>>>>>>>> them. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to a >>>>>>>>>>>>> topic in the Google Groups "RBW Owners Bunch" group. >>>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/l2VRfsS3WwA/unsubscribe >>>>>>>>>>>>> . >>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>>> email to rbw-owners-bun...@googlegroups.com. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/89a4d803-a954-4c29-ae6c-2421d5884a44n%40googlegroups.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/89a4d803-a954-4c29-ae6c-2421d5884a44n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>> >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "RBW Owners Bunch" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to rbw-owners-bun...@googlegroups.com. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/a22c9fae-c717-4d6f-8838-ad892f7064d0n%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/a22c9fae-c717-4d6f-8838-ad892f7064d0n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "RBW Owners Bunch" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to rbw-owners-bun...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/0d74f834-d4ac-40bd-a1e9-1feb6509ec76n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/0d74f834-d4ac-40bd-a1e9-1feb6509ec76n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/8edfd2e3-c19d-4c00-82c4-44f9e77a36f9n%40googlegroups.com.