I was gonna buy one too Drew and wondered just that. I had a Stronglight needle bearing headset way back when and forgot how it went. Based on the image of the IRD Double Roller Drive yes, that's how the assembly goes. Crown race on the bottom, bearing over the crown race, steel race on the top of the bearing, then the bottom cup covers it all7. You likely already assembled it in hand and noticed if the steel race is placed between the crown race and the bearing it likely won't roll too great and there would be a notable gap !
https://www.somafabshop.com/web/image/product.image/1068/image? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/b18e4c04-6800-480f-a0c2-482d9d6a21fdn%40googlegroups.com.