I’ve done it a few times and used a Dremmel to enlarge the hole near the dropout. No matter how much I tried to run the wire without enlarging the hole, I failed. I ended up soldering the “fishing” wire to the cable and pulling it from bottom to top.Took me losing the cable several times mid fork and having to re-fish to come up with that method. Learn from my hours of mistakes! Literally hours.
Joe in Los Angeles > On Nov 20, 2022, at 10:13 PM, Matthew Williams > <matthewwilliamsdes...@gmail.com> wrote: > > Hi everyone, > > Most bikes I see with the SON dynamo have the wire wound around the right > front fork blade. I want to run the wire inside the fork using the small hole > near the dropout. > > I’ve already fished a thin wire through the fork as a leader i.e. I can > attach the leader to the SON dynamo wire and pull it through the fork, unless > the dynamo wire is too thick. Below are photos of the leader wire I fished > through the fork. > > Is this possible, or is it a bad idea? Has anyone here managed to achieve > this setup? If so, how did you do it, and please post photos of your internal > wiring setups! > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/F96B30A1-7731-4480-B361-543BEBABA981%40gmail.com. > <IMG_5037.jpeg><IMG_5038.jpeg> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/944EBADE-B327-407D-821A-4B9C7C1B74FC%40gmail.com.
