Interesting. I can’t imagine not having tubeless with bigger tires especially. Been tubeless for about 10 years and have never had one issue. I did have trouble with my first set needing to be pumped back up every few days for the first month or so. A shop set those up though. I have found that using a tube for a quick ride to make sure the tape is set to be a key. Shops do not take the time for that.
On Tuesday, December 13, 2022 at 8:25:41 AM UTC-8 rmro...@gmail.com wrote: > Good to know! > > Sent from my iPhone > > On Dec 13, 2022, at 11:09 AM, Ryan Frahm <fra...@gmail.com> wrote: > > Richard, my 2.5” Ehline measures right at 2.5”. They are huge sitting > next to the Fleecer Ridge 55mm. They roll very fast compared to the Maxxis > tire as well. > > > > On Tuesday, December 13, 2022 at 8:07:31 AM UTC-8 Ryan Frahm wrote: > >> Hey Keith, are those rims tubeless compatible? >> >> As for machined sidewall, neither set of my cliffhangers have them and >> braking hasn’t been an issue even with the ice and snow. I have seen >> plenty of 2.8” tires successfully run on a 25mm ID (like the cliffhanger) >> rim so i wouldn’t worry much there. You just can’t go quite as low with the >> tire pressure or they get a bit squirmy. Rider weight makes a big >> difference on that though at a certain point as well. >> >> On Tuesday, December 13, 2022 at 8:01:29 AM UTC-8 iamkeith wrote: >> >>> >>> I used the Nimbus Dominator Unicycle rims on my Susie. 42mm outside >>> /.32 inside. They don't offer the machined sidewall version anymore, but I >>> haven't had braking issues. I can detect the pinned joint at times, but >>> it's not a detractor. They're stronger than any other rim (they're meant >>> to carry a rider's e tire weight on one unsuspended wheel) but feel MUCH >>> lighter in reality than they do on paper. I wasn't too concerned about >>> long-term aesthetics, but the brake surface has held up remarkably well. >>> It's a good anodizing. I have anodized rims on one of my most used bikes >>> from 1997 where the finish has held up well, too. In both cases, the >>> blemishes occur when you use them in wet, muddy conditions and get grit on >>> the pads. I have some Kris Holm 29er unicycle rims too, that are even wider >>> and DO have a machined braking surface, but they'd be hard to find. >>> >>> Ive posted pics of my susie a few times here over the past couple of >>> years, but can try to take some more if you're interested. >>> On Tuesday, December 13, 2022 at 8:41:01 AM UTC-7 lconley wrote: >>> >>>> 2mm wider. >>>> >>>> Laing >>>> >>>> On Tuesday, December 13, 2022 at 10:39:16 AM UTC-5 lconley wrote: >>>> >>>>> Alex DM-24. When I was deciding what rims to get built for the >>>>> Hubbuhubbuh, Rich said that the Alex rims were slightly wider - 1mm -> 32 >>>>> mm wide. >>>>> >>>>> >>>>> Laing >>>>> Delray Beach FL >>>>> >>>>> On Tuesday, December 13, 2022 at 10:29:31 AM UTC-5 rmro...@gmail.com >>>>> wrote: >>>>> >>>>>> 2.5"-2.6" tires seem to be at the very upper limits for the venerable >>>>>> Cliffhanger. Is anyone aware of a 700c rim brake rim that is a bit >>>>>> wider? >>>>>> I have not found one. >>>>> >>>>> -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/kJa7lO5X7sg/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bun...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/ce056800-fd3e-49e0-b301-808e1fed0d8en%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/ce056800-fd3e-49e0-b301-808e1fed0d8en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/38ca4020-1892-4bf4-a99b-483bd60f0c58n%40googlegroups.com.