Thanks Nick! On Mon, Jan 16, 2023 at 9:47 PM Nick Payne <njh...@gmail.com> wrote:
> They're not going to fit through the fork without a bit of work to narrow > them where they pass through. I have the VO 63mm fenders on my Appaloosa > (they actually measure 63.5mm), and there's only a fraction of a millimetre > clearance each side where they pass between the fork blades - I fitted > plastic frame protector dots on the inside of the fork blades each side to > prevent the paint being worn off by the fender. > > The rear should fit OK, but it will probably need an indentation on the > drive side just above the chainstay to clear the chain when in your lowest > gear. The VO 63mm fenders come with this indentation already done, but > looking at the Tanaka fenders on the Soma website, I couldn't see that they > are similarly treated. > > Nick > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAK64jTEq%2B2NvBrLv6DxyfqcWOb%2BPs7sEBwpkUojCgm1O0QGNtQ%40mail.gmail.com.