I am right here Jake. Come on in and join the Selle Anatomica H1 saddle Club. Kick to the side your Brooks saddle along with mine. We are done !
Very nice coincidence that the big "H" that is stamped on the saddle matches with Hillborne! Wonderful feature ! Nice build on your Silver Streak Sam Hillbourne. Long may you ride with smiles and joy. Kim Hetzel Yelm, WA. On Friday, January 20, 2023 at 6:31:06 AM UTC-8 jak...@me.com wrote: > Done! > > No one was hurt in the process, thankfully! It goes, stops, and actually > shifts. What fun. My reflections are that I know I took about 10 times > longer to build this than was necessary, but I enjoyed every minute. Very > little profanity was used, hardly any at all. The derailer hanger was out > about, say, 5-10 degrees out of the box, so that was an easy adjustment > with the expensive Park tool that I may never use again. :-) I was able > to find Shimano instructions for the Nexave online, so that was super > helpful. I still need to dial the shifting in, but it works beautifully in > friction mode. It's a mess in index mode. I think I have my answer > there. Keep it in friction. Right. Getting the FD dialed in was much > more finicky than I anticipated. > > Where's Kim? Hey Kim, the Selle Anatomica rocks! Right out of the box > super comfort. I'm definitely joining the club. I am going to kick my > old B-17 to the curb. And the big H stamped on the saddle matches with > Hillborne! Bonus. I am going to hold off on the shellac as the Newbaum > feels great naked. If it gets gnarly over time it's easy enough to > rewrap. I might hit up the twine with some shellac though. I might also > swap out those black DXR brake handles for some expensive Paul's as I am > not sure I like the black. They sure do work well, though. The Albatross > looks huge in this picture, but not so much in reality. It's a keeper - > super comfortable. Body positioning is very neutral on this upright > configuration. Love the platform of the pedals. I tried to keep the > obnoxious blue to a minimum while accenting it. That's an Air Force blue > if anyone was wondering. > > Needs a rack or two, undecided on fenders (toe clearance), and a cool > matching stowaway bag from Tunitas is on it's way. Time to re-torque > everything and go for a nice long ride. > > [image: Silver Sam.JPG] > > Last night when I finished it. Cockpit view. > > [image: SH Cockpit.JPG] > > Fun stuff! > > On Friday, January 20, 2023 at 8:59:39 AM UTC-5 Slacky Mac wrote: > >> Have you looked at the SimWorks "Obento" rack? >> >> Hi David, yes I did. Jess (of Tunitas) directed me to the Obento after I >> inquired what that beautiful rack was on her bike pictured on the Riv >> site. Sadly, not the same aesthetic as the Potluck. Similar function >> though. >> >> On Wednesday, January 18, 2023 at 3:34:11 AM UTC-5 Hetchins52 wrote: >> >>> Have you looked at the SimWorks "Obento" rack? >>> https://www.sim.works/products/obento-rack >>> Pricey, but the "shiny" version seems to be in stock! >>> >>> David Lipsky >>> Berkeley, CA >>> On Tuesday, January 17, 2023 at 12:40:19 PM UTC-8 jak...@me.com wrote: >>> >>>> “Any changes in parts and such while thinking over the build?” >>>> >>>> Reginald - yes, a few! I switched to bar ends as thumbie mounts were >>>> temporarily out of stock and I was impatient. Lots of downstream effects >>>> from that one. I originally wanted to go with Ergon cork grips with >>>> something like a Billie or a Crumworks bar. I’ll see if the bar-ends on >>>> my >>>> old Albatross and prodigious use of Newbaums works. It’ll be creative >>>> (nice word for obviously DIY). If it’s not comfy, easy enough to make a >>>> change. >>>> >>>> With the gigantic pedals, I am concerned with toe-to-tire spacing, so >>>> am holding off on fenders. Also no decision on racks. Crushed that the >>>> Nitto Potluck rack is NLA. >>>> >>>> Getting there. Riv box delivered today, more work this weekend. >>>> Assuming the Nexave derailer doesn’t derail me, should be finished up and >>>> ready to ride. (Whoa that’s a big photo - sorry). >>>> >>>> Jake >>>> >>>> [image: A00698B8-FA9B-4BE4-8582-253D37FDB4B9.jpeg] >>>> >>>> >>>> On Monday, January 16, 2023 at 1:46:21 AM UTC-5 R. Alexis wrote: >>>> >>>>> Congratulations!!!! How exciting when the planning and futzing over >>>>> the bike and parts finally come together. Any changes in parts and such >>>>> while thinking over the build? I know when I built the Rivendell Mountain >>>>> I >>>>> went back and forth on several items. Thought of doing an 8 speed >>>>> freewheel, but it seemed much when accounting for the hub set up and >>>>> scarcity of 8 speed freewheels. Planned on doing a Nitto built Ritchey >>>>> stem, but going with the Softride suspension stem was a strong pull. >>>>> >>>>> Take it slow, don't supper force anything. Take it easy with the >>>>> hammer! Lol!!! >>>>> >>>>> Thanks, >>>>> >>>>> Reginald Alexis >>>>> >>>>> On Saturday, January 14, 2023 at 9:37:33 AM UTC-6 jak...@me.com wrote: >>>>> >>>>>> I had to say it: "Just ship it to me". >>>>>> >>>>>> If Vince knew any better, he would have talked me out of it. I've >>>>>> never built a bike from (mostly) scratch before, and of course it had to >>>>>> be >>>>>> a Riv. Gutsy. There may be other less flattering words for it. >>>>>> >>>>>> Learning from all of you has given me false bravado to forge ahead, >>>>>> so I shall. Picking parts has been a delight. I have been embracing >>>>>> the >>>>>> anticipation of arriving shiny bits as patience will most definitely be >>>>>> virtue. Just one more box from Riv and I'll have all I need. I think I >>>>>> have a hammer around here somewhere. >>>>>> >>>>>> If I blow it, you'll never hear from me again. If it rolls fast and >>>>>> true, I will post a glorious, victorious photo from Flatistan, FL. >>>>>> >>>>>> See any parts you like? Wish me luck! >>>>>> >>>>>> #goheavyontheboeshield >>>>>> >>>>>> [image: Sam Parts.jpg] >>>>>> >>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/306989af-9318-4b44-95c5-793a1190fda7n%40googlegroups.com.
