You look accepted to me! Lol. Thanks for your post, and welcome to the group.
On Sat, Jan 21, 2023, 1:00 PM jeff dobie <[email protected]> wrote: > I have an S65 and have used it on two different Brooks saddles and when > cranked down so the saddles don't slip there are indentations in the clamp > areas on the seat rails. I would think with a carbon fiber rail this would > not be a good thing. this was typed on 012123 but I am not accepted to the > group so it will probably be a month before this post shows. > > On Saturday, January 21, 2023 at 2:19:06 AM UTC-7 [email protected] > wrote: > >> On the one hand, I don't see any reason to believe that Nitto's saddle >> clamps clamp any tighter than anyone else's. I suspect the clamping >> strength is limited by the materials; Nitto's using aluminum and steel >> alloys similar to those other manufacturers use. >> >> On the other hand, I still have to call Selle An-Atomica and yell at them >> about the *steel* rails in my H2 (tubes, not rods as I discovered), >> which snapped through about 1" in front of the two-bolt Campy seatpost >> after barely one year's riding. >> >> So, your mileage may vary, as a regular correspondent might say. >> >> Peter "current owner of six SA-A saddles, with about six others stolen or >> ridden to death" Adler >> Berkeley, CA/USA >> >> On Friday, January 20, 2023 at 5:58:21 PM UTC-8 [email protected] >> wrote: >> On Nitto's site, they didn't condone carbon rails on any of their >> posts...but I mean, other aluminum posts can be used with carbon rails so >> who knows. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/m90mZG3azRs/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/e21d40ee-0ec3-4144-8269-e4b20bfa8c3an%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/e21d40ee-0ec3-4144-8269-e4b20bfa8c3an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAGnPyMFZHdgK7r%3Dva8ETSYmhcJ9iA1G4ffa8AZOTywvCSfG0hA%40mail.gmail.com.
