Judging from a photo is basically impossible but I'm going to do it anyway,
your spacers look wider than my 3.5. I'll betcha 3.5 is the ticket for you.
On Saturday, May 13, 2023 at 11:37:28 AM UTC-7 J Schwartz wrote:
> thanks for all the input
> very helpful....and for the article on chainline...something I always
> avoid getting too detailed about, but should.
> I believe the Silver crank requires spacers between granny and middle, but
> I could be wrong.
> Here's a pic from above
> [image: IMG_0587.jpg]
> I'll measure the spacers and see if they are closer to 5mm or 3.5mm
> Also, the chain is a 9 speed.
> I may need to do a little dialing-in on chainline in general. The BB is a
> Phil and I can move the 113 spindle left or right as needed.
>
> On Saturday, May 13, 2023 at 2:00:43 PM UTC-4 Patrick Moore wrote:
>
>> Oh, and my spacers are AFAIK from the 7 speed or 8 speed era -- they've
>> been in my little drawer for decades -- and I'm using them with an 11
>> ("eleven") speed chain (42/28 X 10-25 10 sp cassette); it never occurred to
>> me that I might have spacing problems and in fact I never have had any.
>>
>> On Sat, May 13, 2023 at 11:58 AM Patrick Moore <[email protected]> wrote:
>>
>>> I've not used the Silvers but some square taper triples used spacers
>>> between middle and granny; I just looked at the spacers between the 42 t
>>> ring and the 28 t granny on my Logic 110 triple (guard/42/28).
>>>
>>> On Sat, May 13, 2023 at 8:46 AM Will Boericke <[email protected]> wrote:
>>>
>>>> I've never had to use spacers on chainrings, but I've also never
>>>> disassembled the aforementioned crank. To my mind, if you need spacers on
>>>> a crankset, you've designed something wrong.
>>>>
>>>>
>>
>> --
>>
>> -----------------------------------------------------------------------
>> Patrick Moore
>> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum
>>
>>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/bed5d841-95e3-4d8d-96b7-40f9bded9905n%40googlegroups.com.
