Matthew, 

Thanks for the update with pics. I’m not sure I’m intrepid enough to dive right in, but you make it look do-able. 

Can’t wait to see pics of the final build. 

Dustin

On May 25, 2023, at 1:24 PM, Matthew Williams <matthewwilliamsdes...@gmail.com> wrote:

Hi everyone, I thought you'd like an update of my progress.

<coax_8185_lores.jpg>

After frying several connectors with my Bronze Age soldering iron, I borrowed a friend's pencil iron and electronics solder and added the Schmidt coaxial connectors to the headlight and dynamo leads.

<dynamo_8197_lores.jpg>

I like the cleanliness of the internal wiring.

<light_8194_lores.jpg>

Let there be light!

<bottombracket_8200_lores.jpg>

I fished the taillight wires through the bottom bracket and chainstay...

<dropout_8198_lores.jpg>

...and out at the rear dropout.

<taillight_8202_lores.jpg>

I wasn't satisfied with B&M's plastic mount for the Micro taillight so I fabricated a lowercase p-clamp for the seatstay.

<grips_8204_lores.jpg>

I also made a new set of leather handgrips to match my new saddle. Here's the earlier version.


--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/4357783f-9d8f-4c25-b630-48741f651bc8n%40googlegroups.com.
<taillight_8202_lores.jpg>
<dropout_8198_lores.jpg>
<coax_8185_lores.jpg>
<bottombracket_8200_lores.jpg>
<light_8194_lores.jpg>
<dynamo_8197_lores.jpg>
<grips_8204_lores.jpg>

--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/76CCDED9-49D1-4626-832C-EF0F255F4F82%40gmail.com.

Reply via email to