Thanks, Eliot. Yes, cable housings are filed and run in very smooth curves with no bends. I'll try easing off on the binding.
Cheers, John On Tuesday, June 13, 2023 at 5:35:58 PM UTC-7 eliot...@gmail.com wrote: > Also, did you file your cut housing ends? > > On Tue, Jun 13, 2023 at 5:34 PM Eliot Balogh <eliot...@gmail.com> wrote: > >> Hey John, >> >> It’s a little hard to tell over the internet but based on your >> description, a few thoughts come to mind. Are your cable runs clean with >> easy bends ? Is your housing contaminated ? Can you ease off the binding >> bolt on your shifter ? >> >> I have always avoided lubing my cables out of fear of attracting dirt. >> >> Eliot >> >> On Tue, Jun 13, 2023 at 3:15 PM John Rinker <jwri...@gmail.com> wrote: >> >>> Both my Hunqapillar and Atlantis shift cleanly and, given the state of >>> the rider on a given day, precisely. The Hunq has buttery shifting all >>> across the rear cogs- easy, smooth, and...buttery! The Atlantis, however, >>> is smooth but a little more resistant to change, and requires a little more >>> force. >>> >>> Both bikes have the same lengths of cable housing lined with a silicon >>> spray and the cables are greased with Slick Honey. The Hunq sports Silver >>> Shifters 1.0 and the Atlantis, Gran Compe. Both as bar ends. Aren't these >>> were basically the same shifters? >>> >>> So, what gives? >>> >>> Cheers, John >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/97a124fa-704b-44d6-b92b-463031aa7582n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/97a124fa-704b-44d6-b92b-463031aa7582n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/65d15a17-91bd-466e-93a9-ffb147f50a8an%40googlegroups.com.
