I have my Edelux mounted the same way and the Wald rail rubbed off a bit of aluminum at the top of the light even with a few millimeters of clearance. I ended up bending the interfering rail upwards for more clearance. This worked but the cosmetic damage is done. If I were to do it again, I would buy the hanging Edelux or use this Tanaka basket mount:
https://www.somafabshop.com/shop/320707-tanaka-dynamo-light-mount-for-basket-ii-6544?page=3&category=950#attr= On Sunday, November 26, 2023 at 8:07:49 PM UTC-5 Paul Richardson wrote: > howdy folks > > i have a nitto 32f > <https://www.merrysales.com/shop/18642-nitto-rack-front-campee-32f-riv-mini-3809#attr=> > rack > with a wald basket, and i'm trying to figure out the best way to mount an > edelux to it. (the light is an upright mount, not a hanging mount). > > i bought the nitto lamp holder, not realizing that its intended use seems > oriented toward a rack with actual struts, as opposed to the 32f which is a > single piece and thus cannot use the strut mount. i've got it bolted onto > one of the braze-on mounts, but the clearance is quite bad and i don't like > it. i also tried it on a b+m light mount that i zip-tied to the rack, but > that left me wanting both aesthetically and functionally. hoping the pics > help this make sense. > > i'd welcome any input on mounting ideas. > > thanks! > paul > takoma park, md. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/dc711003-d007-4a16-b75b-061581f3f02dn%40googlegroups.com.
