Thanks everyone! On Tuesday, December 19, 2023 at 5:30:12 AM UTC-8 ma...@mindmechanics.net wrote:
> I use it with an 11-32 cassette (friction shifting) and it works fine. I > originally used it with a wolf tooth road link but realised it didn’t need > it so now run it without. No problems. > > Cheers, > > Mark > Glasgow, Scotland > > On Tue, 19 Dec 2023 at 12:50, Peter White <peter...@gmail.com> wrote: > >> You can get it to work with the larger cogs, up to 32 teeth, but when you >> do that the shifting on the smaller cogs will suffer, depending on their >> size, as the upper pulley will be too far from the cogs. I get excellent >> shifting across the entire range with a 30 tooth large cog and 14 tooth >> small, but that's the limit, unless you're OK with sluggish shifting at the >> small end. The problem is you have to tighten the "B" screw too much in >> order to clear the largest cogs, resulting in the upper pulley being too >> far from the 11 or 12. I suspect that if I had a 12 tooth small cog it >> wouldn't shift well, but I haven't tested that as a 12 tooth small cog >> would never get used, at least not by me. ;-) >> >> On Mon, Dec 18, 2023 at 8:36 PM Greg J <greg...@gmail.com> wrote: >> >>> I too have used it with a 11-32 and it worked fine. >>> >>> On Monday, December 18, 2023 at 4:16:04 PM UTC-8 Andy Beichler wrote: >>> >>>> I am running an 11-32 cassette with a long cage and it indexes fine. >>>> >>>> On Monday, December 18, 2023 at 6:47:48 PM UTC-5 codyt...@gmail.com >>>> wrote: >>>> >>>>> I have one with an 11-30 cassette and it works well. >>>>> >>>>> Cody, Chicago >>>>> >>>>> On Mon, Dec 18, 2023 at 5:42 PM dylan green <dylantho...@gmail.com> >>>>> wrote: >>>>> >>>>>> Thanks Jeremy - I was definitely hoping an 11-32 would be OK. >>>>>> >>>>>> On Mon, Dec 18, 2023 at 3:35 PM Jeremy Till <jerem...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Generally, with Shimano road derailleurs the short and long cage >>>>>>> versions usually had about the same max cog specification, around 27 or >>>>>>> 28t. The difference was that the longer cage one had enough capacity >>>>>>> that >>>>>>> it could handle a triple in front. >>>>>>> >>>>>>> The general consensus around here is that Shimano derailleur >>>>>>> capacity/max cog specifications are usually a little bit on the >>>>>>> conservative side, and many have successfully used them with larger >>>>>>> rear >>>>>>> cogs than those for which they were specified. If it were mine, I'd be >>>>>>> tempted to see if it could shift something like an 11-32 cassette. >>>>>>> >>>>>>> -Jeremy Till >>>>>>> Sacramento, CA >>>>>>> >>>>>>> >>>>>>> On Monday, December 18, 2023 at 3:14:12 PM UTC-8 >>>>>>> dylantho...@gmail.com wrote: >>>>>>> >>>>>>>> I have a 6500 series Ultegra RD with a long cage. Anyone know the >>>>>>>> range of cassette I should be able to work with? I believe the short >>>>>>>> cage >>>>>>>> can take 28, but I can't find the long cage max anywhere...any help is >>>>>>>> appreciated! >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "RBW Owners Bunch" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/5v404BLEBWk/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> rbw-owners-bun...@googlegroups.com. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/4404a9fa-345c-4632-b8c6-eececffb25efn%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/4404a9fa-345c-4632-b8c6-eececffb25efn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>>> >>>>> You received this message because you are subscribed to the Google >>>>>> Groups "RBW Owners Bunch" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to rbw-owners-bun...@googlegroups.com. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/CAG%2Bh3f0cnhOa9x%3D_yL2QuX6P%3DhVQ%3DgZhwv3nfKf429CmeNwOvQ%40mail.gmail.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/CAG%2Bh3f0cnhOa9x%3D_yL2QuX6P%3DhVQ%3DgZhwv3nfKf429CmeNwOvQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/48a14159-2f78-4c19-9652-7a9658f3bcd1n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/48a14159-2f78-4c19-9652-7a9658f3bcd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> Peter White >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/CA%2BD%3DXm8-79hYwiAhhdTuW%2Bi0C87n-KrGuORaYpbrB2Huqmk5fA%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/CA%2BD%3DXm8-79hYwiAhhdTuW%2Bi0C87n-KrGuORaYpbrB2Huqmk5fA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/05140973-d945-4fbe-b0ea-8522c70af77cn%40googlegroups.com.
