I bent mine to get the Nitto R14 low and as close to the frame as possible. Didn't have anny issues.
René On 6/12/10, KyleBH <holla...@gmail.com> wrote: > Any tips/suggestions for bending some aluminum struts for the Nitto > Top Rack? The braze-ons on my new bike are fairly low (compact frame) > and the struts on the top rack only come out parallel to the rack, and > end up too high. So I need a 3o degree bend or so. > > Probably not rocket science, just clamp and bend, just wondering if > others have bent these struts successfully. > > Thanks, > > Kyle > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- Sent from my mobile device -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.