I have a 26.0 moustache bar, original to the old school atlantis, would you be interested? Let me know!
Best, IY from New Haven, CT/NYC On Wednesday, July 10, 2024 at 7:45:56 PM UTC-4 jinxed wrote: > OK, used a better camera and found some lighting that illustrates the area: > > [image: IMG_6444.jpg][image: IMG_6446.jpg] > > On Wednesday, July 10, 2024 at 3:53:43 PM UTC-6 jinxed wrote: > >> I may have made a hasty purchase and ended up with a bum frame. But I'm >> going to try to make the best of it. >> >> So...I parted ways with my 26" Atlantis a while back in hopes to find a >> 55-56ish 700c Hillborne (short stay) to replace it. I watched Riv, and the >> used market for literally years, and just kept missing them. I fell short >> of a wanted ad, as I didnt really NEED one and figured it would pop up one >> day. Well, I sort of gave up and stopped checking. However, as age, and >> circumstances will do, I am now creeping closer to the need of a more >> upright and comfortable bike. I check in here and BOOM...a new run of short >> stay Hillbornes!! AAAAAND they're sold out in my size. Ugh. >> >> Deflated, I go back to trolling the used market, and my first search >> brings up a 55 Canti Rom...20 minutes from me. THIS would do nicely and was >> a previous target of obsessive searching. The seller informs me there's a >> brake lever ding on the TT and dent on the seat stay. Not deterred, we plan >> to meet. 75yo gentleman who clearly has ridden some bikes, and seems to be >> a DIY mechanic. Bike looks good, albeit with an odd build. Not Rivvy, but >> more hodgepodge of commuter/2000 road bike. Rode fine, set up was not >> comfortable for me but the frame fit, the dents were unfortunate but not >> apparently damaging. We strike a deal, and I bring it home. >> >> The lay of the land: >> Threadless adaptor with super upright stem and Noodle bars which I do not >> like >> Thorn proof tubes and 28c rock hard commuter tires >> BIG gel saddle on a layback post >> Canti rear, side pull front >> >> All of this meant, I needed some time to strip it all down, acquire some >> parts, and rebuild to my preference. No worries...until I got to it a few >> weeks later. >> >> After stripping it mostly down, I started to clean the frame and noticed >> a bizarre, what I thought was a scratch, in the paint on the top tube just >> at the end of the head tube lug point. Looking closer, its more like the >> paint is crackled or scrunched. My gut sank. I immediately checked under >> the DT for a bulge or other signs of front impact. Nothing. Seems totally >> fine. But the TT really looks odd. I've worked in shops for 30 years and >> have seen many cracks, dents etc...generally there's apparent trauma you >> can trace to other areas, but this is a new one to me being isolated. The >> other oddity that may be normal on these...is that the TT feels like it's >> externally butted to fit the HT lug. Nothing massive, but just a slightly >> perceptible increase in OD right about the point of the lug. Imagination? >> By design? Bulged from impact? No idea. >> >> All that said, I am bummed, but absolutely hold no ill will towards the >> seller. I truly believe he had no idea and was completely up front with the >> damage he knew about. AND it could just be a scratch or other paint >> anomaly. Yes, I could have the paint stripped back and find someone >> knowledgeable to inspect it, but I feel like the options in the end are the >> same...spend more than the frame is worth to repair it, or just ride it and >> "keep an eye on it". I'm thinking the latter is the better way. >> >> I have tried to get a photo of the offending area but it's elusive. I >> will try some different lighting to see if I can capture it and follow up. >> >> Which brings me to my inquiry. I would like to try an AlbaStache and I >> have two great stems I could use that are both 26.0....do I remember >> correctly there were some original batches with that clamp size or no? I'd >> prefer not to shim, and would ultimately just get a 25.4 stem if need be. >> Trying to limit the losses on this one now. >> >> So IF they exist, does anyone have a set they'd be willing to sell? Or on >> the longer shot, a bar/stem? >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/fa3a0fe2-24c2-4fd0-809d-3d7abe501f0bn%40googlegroups.com.
