I’ve found that adding a small dab of white lithium grease or something like Parks grease to all points of metal-to-metal contact generally takes care of this. The most critical area appears to be the nose. Loosen the adjusting screw, apply there, and re-snug.
On Tuesday, September 24, 2024 at 1:23:30 PM UTC-4 ian m wrote: > Has anyone had this issue and been able to fix it? I have a very new B17 > flyer (with cutout) that is just too noisy and it really grinds my gears. > I'm having difficulty finding the origin, it sometimes sounds like it's the > actual leather, sometimes the top of the springs where it meets the saddle > frame, and sometimes the higher set of rails that runs parallel to the > frame rails. The only thing I haven't tried is messing with the bolts on > the springs, wondering if I should remove and grease everything but I'm > worried that may be more difficult than it appears. Thoughts or > suggestions?? > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/b6a3f08f-e1d0-4ef9-ab1a-9d5dd152d18dn%40googlegroups.com.
