This is good to know. Thanks. Since I have a newer Homer, I'm running Paul Racer centerpulls so I would need to use Ron's trick that Brian shared above. I'm currently using drop bars and will likely be going back to alt bars soon so a set with some rise on it would probably help keep the stem low enough such that the M1 rack works. I have Nitto Kite bars that I'm hoping to use, but that has almost no rise to it.
-Don On Wednesday, October 16, 2024 at 4:24:27 PM UTC-7 [email protected] wrote: > Same chest on my Appaloosa with a Nitto M1 rack. Running Paul cantilevers > on this rig, rack helps keep the bag from interfering with the hanger. > > [image: 231007 03 Appa porch.JPG] > > On Wednesday, October 16, 2024 at 7:17:06 PM UTC-4 Eric Marth wrote: > >> For the love of Zeus, Nicholas, what a picture! >> >> I've had no trouble running a Fab's Chest rackless on my 57cm Hillborne >> with Paul mini-moto v-brakes installed. >> >> [image: IMG_2650.jpg] >> >> On Wednesday, October 16, 2024 at 2:38:34 AM UTC-4 Donzaemon wrote: >> >>> Thanks for all the replies everyone! Looks like a DIY pec dec or Rod >>> Steward’s the best (and probably only) solution. >>> >>> On Tuesday, October 15, 2024 at 10:46:52 AM UTC-7 J wrote: >>> >>>> Bag is empty here but it still makes the point. There's 11.5 inches >>>> from the base of the only front rack I have left, (Nitto 32f Campee? I >>>> think) to the bottom of the handlebars. >>>> >>>> [image: DSCF3085.JPG] >>>> >>>> On Tuesday, October 15, 2024 at 10:40:44 AM UTC-4 Jay Lonner wrote: >>>> >>>>> I have both a Rod Steward and a homebrew Pec Deck. I slightly prefer >>>>> the Pec Deck — it plays a little nicer with my Tubus Tara low-rider front >>>>> rack. Having said that, I think I’m going to replace the whole shebang >>>>> with >>>>> a Pass and Stow 3-rail rack and Bags by Bird Right Height custom >>>>> handlebar >>>>> bag. >>>>> >>>>> Jay Lonner >>>>> Bellingham, WA >>>>> >>>>> Sent from my Atari 400 >>>>> >>>>> On Oct 15, 2024, at 5:33 PM, Ty Graham <[email protected]> wrote: >>>>> >>>>> >>>>> >>>>> <IMG_5368 2.jpeg> >>>>> >>>>> >>>>> Here’s a very non optimized setup using the fabs abs from ronsbikes >>>>> modified with xl nitto rack struts from Rivendell. >>>>> The xl struts give a lot of wiggle room to eventually get the fit you >>>>> want. >>>>> (Not a riv, but you get the idea) >>>>> >>>>> TyG >>>>> Seattle >>>>> >>>>> -- >>>>> >>>>> You received this message because you are subscribed to the Google >>>>> Groups "RBW Owners Bunch" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/c4775abf-ff61-4488-9350-7d6589ecd006n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/c4775abf-ff61-4488-9350-7d6589ecd006n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> <IMG_5368 2.jpeg> >>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/58e9d1f4-842c-4ee4-bf03-cef873387201n%40googlegroups.com.
