Thanks everyone! Looking forward to trying this out! On Monday, October 21, 2024 at 11:04:56 AM UTC-4 [email protected] wrote:
> > > > > > > I have one on my Waterford “Atlantis” build > It works great and this seems to be a near infinite way that you can > adjust the frame mounts. The only problem might be if you could struts two > short but then again you would be able to a new set of > > > > > > > > > > ------------------------------ > *From:* [email protected] <[email protected]> on > behalf of iamkeith <[email protected]> > *Sent:* Sunday, October 20, 2024 12:23 PM > *To:* RBW Owners Bunch <[email protected]> > *Subject:* [RBW] Re: SH and trail a bike > > I used one of those, but it was mounted to old mountain bikes mostly. I > can't imagine why it wouldn't work on a Sam Hilbourne since it probably has > more and better braze-ons. I'd maybe measure the vertical height from > your lower mounting point to the top of the rear tire/fender, to make sure > you have clearance under the top of the rack. Is there some other specific > condition you're worried about? Should be fun! > > On Sunday, October 20, 2024 at 10:53:42 AM UTC-6 Bill Lindsay wrote: > > I should be terrific provided you have the hardware to get the Moose Rack > nice and level on your Hillborne. > > Bill Lindsay > El Cerrito, CA > > On Sunday, October 20, 2024 at 8:53:44 AM UTC-7 [email protected] > wrote: > > I just got a new to me Hillborne and was wondering if anyone out there has > used the Burley Moose rear rack to use a trail-a-bike setup on a Riv. I’ve > been using this setup on my aged Surly CC and can’t imagine it would be an > issue on my new ride, but thought I’d ask before I disassemble. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/2ed210d5-f958-4eb5-a2fb-3bd25c38aa1an%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/2ed210d5-f958-4eb5-a2fb-3bd25c38aa1an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/e7534db7-0ec8-4093-b977-86a4a50d0581n%40googlegroups.com.
