I'll throw in my favorite nemesis: derailleur hanger alignment. Might as well check. Agree that the shift in question should happen and a 10s cassette should work on that hub. I have a sram x9 RD that doesn't shift well onto the small cog as well; I suspect it's an older weak spring that's the culprit there. Luckily I only ride the bike 1x/year :)
Will On Wednesday, March 12, 2025 at 5:23:13 PM UTC-4 [email protected] wrote: > Two good suggestions above that I will try. Thank you! > It also occurred to me that I could dremel-off the teeth from a parts bin > cassette cog (roughly 1.6mm thick) and use that behind the lockring instead > of the 1.85mm spacer behind the cassette. That would be radical... but > perhaps worthwhile to try. > > On Wednesday, March 12, 2025 at 3:02:45 PM UTC-6 [email protected] wrote: > >> You'll get better shifting if you use the cables dry and just depend on >> the liner to get clean shifts. >> >> PJW >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/02d86146-651e-4a5e-b14c-433603a2ecd1n%40googlegroups.com.
