Way BITD I used Velomax Circuits on my cyclocross bike. They were a good tough wheelset. Easton bought Velomax and within a couple of years the Circuit was rebranded to the EA50 or 70. They held up well to the mud and banging around of cyclocross racing under my 165# frame and I wouldn’t worry about using them for any kind of riding except for maybe fully loaded touring to middle of nowhere. I also seem to remember a different kind of spoke which may not be as good for replacing on a tour, but maybe your set is using a different hub …
On Sunday, July 6, 2025 at 2:16:53 PM UTC-4 Tom Goodmann wrote: > There's a good local deal on a set of wheels built on Easton Circuit T3 > rims; 28 spokes on the rear wheel. I have no experience with Eastons; my > sense is that these might be intended for fast road riding (read "carbon > fiber") rather than a Heron Road or Touring or other Riv-adjacent bike. > I'll appreciate any advice shared. > > Thanks, > > Tom > Hotlanta . . . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/addba4b1-c43a-4217-8060-64bfc70fc93fn%40googlegroups.com.
