Roberta,
That is a beauty! Someone will be getting a fantastic bike! 
Doug

On Wednesday, February 11, 2026 at 4:57:14 PM UTC-5 Roberta wrote:

> I’m looking to move this Platypus to have a happy rider be pedaling it 
> around their neighborhood this spring. Rivendell may not have these in 
> stock for months. Complete bike with Dyno, fenders, tubeless, 1x11. Well 
> maintained with extra new in box. no dings or paint chips. $3100
> On Sunday, February 8, 2026 at 4:26:35 PM UTC-5 Roberta wrote:
>
>> Original RivSister 55 cm Mermaid Platypus for sale.  I checked with my 
>> RivSisters and they said it was OK, since I also have a Betty Foy and an A. 
>> Homer Hilsen. 😊
>>
>>
>> I’m the original owner of this first generation Platy with the sexy 
>> swoopy top tube/seat tube attachment,  speced and built in May 2020 by the 
>> awesome James and Candice at Analog Cycles in Vermont.  It was meant to be 
>> a replacement for a more rugged Joe Appaloosa, which I sold to get this 
>> bike for both road and trails, but I don’t do much non-road riding, so I’m 
>> letting this go to someone who would ride and appreciate it.  It rides just 
>> as well on paved roads, too, but I have bikes for just that; I don’t need 
>> this beautiful redundancy. 
>>
>>
>> Since I have other bikes, this one got partial use, and I’d estimate 
>> 1-2000 miles, no more than that and probably closer to the lower end.  Most 
>> miles have been road miles and this bike is great for that.  I’ve taken it 
>> on the D&L Canal towpath (Washington Crossing State Park in PA/NJ) a couple 
>> of times, which is packed dirt with pea gravel.  It rode beautifully.  Not 
>> ridden in rain or snow, but it got wet during car transportation, and there 
>> is some springtime riding salt spray on the rear cassette which does not 
>> interfere with its use, that I wasn’t able to clean completely.  The chain 
>> is starting to show signs of rust, but the bike shop cleaned it, lubed it, 
>> measured it this fall and told me it would be fine for awhile. Always kept 
>> inside, in my living room.  It’s in great condition.
>>
>>
>> Well maintained by the mechanics at Keystone Bike and me.  Orange Seal 
>> Endurance added to tires in January and checked over at that time.  No 
>> known dings or chipped paint except tor the screw holes on the fork crown— 
>> 90% is painted; please see pictures.    An additional new-in-box 1x11 
>> Garbaruk rear cassette (retail $280) is included.  Unlike other “it’s ready 
>> to ride” claims, this bike really is; I take care of my possessions.
>>
>>
>> I’m in Philadelphia and I’m willing to meet a serious buyer up to an 
>> hour-ish away.   Once you take her for a spin, you’ll want to ride her 
>> home.   I’m also willing to have it packed and shipped at buyers expense. 
>> Or, pick it up at the Philadelphia Bike Expo in March, if still available. 
>>
>>
>> Since I don’t have the skills to disassemble, I’d rather sell this bike 
>> fully built.  
>>
>>
>> $3,500.  Venmo, Zelle, or PayPal Friends and Family.  
>>
>>
>> BUILD HIGHLIGHTS (detailed build sheet below)
>>
>> 2020 55 cm Mermaid Platypus frame 
>>
>> Rivendell Billy bars, with 1 cm cut from length (it comes way back)
>>
>> Nitto extra tall 10 cm stem
>>
>> Garbaruk 1x11 drive train with index shifting
>>
>> Dynamo hub and front and rear lighting system
>>
>> Additional battery powered rear fender light
>>
>> Gravel King SK+ tubeless tire setup
>>
>> Pacenti  Brevet rims with fun colorful nipples and valves
>>
>> Full fenders
>>
>> Brooks B68 saddle
>>
>> Ergon grips
>>
>> Greenfield kickstand
>>
>> Water bottle cage
>>
>> Additional new in box Garbaruk rear cassette 
>>
>>
>> ***The rack is not included.***  
>>
>>
>> Please DM me with any questions.   Thank you for your time and 
>> consideration.  I’m looking forward to moving this to another happy owner.
>>
>>
>> Roberta
>>
>> Philadelphia, PA
>>
>>
>> BUILD DETAILS
>>
>> FRAMESET 
>>
>> Headset 1"
>> Stock FSA Sealed Bearing
>>
>> Headset Spacers 1"
>> Basic Alloy 10mm
>>
>> Stem, Quill
>> Nitto 10 cm xTrall 
>>
>> Handlebars Trekking
>> Billie Bars, shortened 1 cm
>>
>> Grips 
>> Ergon GE1
>>
>> Mtn Brake Lever, LP
>> LitePro Levers
>>
>> Rim Brakes
>> Litepro w/ Koolstop Pads and Stainless Hardware
>>
>> Trigger Shifter 11spd
>> SRAM NX
>>
>> Shift Cables x1 TL 
>> Jagwire Sport
>>
>> Shift Housing Interrupted
>> Jagwire Lined
>>
>> Brake Cables TL
>> Jagwire Sport 
>>
>> Brake Housing Interrupted
>> Jagwire Lined
>>
>> Ferrules 
>> Brass
>>
>> Saddle
>> Brooks B68
>>
>> Seatpost 26.8
>> Nitto, Rivendell's standard one
>>
>> Chain
>> Connex Stainless 11 speed
>>
>> Pedals
>> Clem Pedals
>>
>> Crankset 1x square taper
>> New Albion with trouser guard + wolftooth ring
>>
>> Chainstay Protector
>> Clear Plastic
>>
>> Cassette
>> Garbaruk 11 speed
>>
>> Rear Derailleur Mtn 1x
>> SRAM NX Rear Mech
>>
>> 700c Rim Brake Rim
>> Pacenti Brevet 700c
>>
>> Front Hub 6 Bolt
>> Shutter Precision  Dynamo
>>
>> Hub Rear 6 Bolt
>> Bitex
>>
>> Spokes
>> Sapim Race
>>
>> Spoke Nipples
>> Sapim Alloy
>>
>> Valve Stem
>> WTB Alloy
>>
>> Rim Tape 
>> Analog Tubeless Tape
>>
>> Tires 700c Road
>> Panaracer Gravel King SK+ 700 x 43
>>
>> Quick Release Front
>> Shimano
>>
>> Quick Release Rear
>> Shimano 
>>
>> Fenders 700c
>> SKS Longboard
>>
>> Kickstand
>> Greenfield
>>
>> Water Bottle Cage Bolts
>> VO Mohave with tabs
>>
>> Additional Cassette
>> Garbaruk 1x11, new in box
>>
>> LIGHTS
>>
>> Headlight Dynamo
>> Schmidt Edelux II
>>
>> Light Mount, Fork Crown
>> B+M Steel
>>
>> Taillight Dyna Rack
>> Busch & Müller Toplight Line Plus
>>
>> Taillight Battery Fender
>>
>> Vena
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/34414e76-1b1b-4937-b198-c18c3aaf7ef2n%40googlegroups.com.

Reply via email to