Hi, I get a stainless steel socket head cap screw, about 10mm long to do that job. And use a washer too. Cheers! On Jul 24, 2010, at 12:47 PM, Brad Gantt wrote:
> Forgive me if this is a silly question. I am finally getting around to > mounting my Pletscher KS on my Riv custom which has a handy plate for > just this purpose. Since I will not be using the top mounting plate > that came with the 'stand, I am wondering if I need to use a nut, > washer, whatever to do the job right. Lastly, to those Bunchers who > have done this already, did you use the supplied bolt as-is, hacksaw > it down, buy a shorter one? There will be a lot of unused bolt hanging > below the plate. Not sure it will make any difference. Just curious > what other folks have done. Thanks! > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > James Valiensi, PE Northridge, CA H818.775.1847 M.818.585.1796 -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.