Adam A travel agent won't help. It is designed for linear pull brakes.
Is it possible that you used derailleur cable housing instead of brake housing? Is it possible that the brake housing isn't properly seated in the brake lever bodies? On Sep 13, 2:27 pm, James Warren <jimcwar...@earthlink.net> wrote: > Mark at Rivendell built up my AHH with the Silvers and the Shimano Tiagra > levers that they sell, and the performance is excellent. > > -Jim W. > > > > -----Original Message----- > >From: Adam Kimball <adamfkimb...@gmail.com> > >Sent: Sep 13, 2010 2:21 PM > >To: RBW Owners Bunch <rbw-owners-bunch@googlegroups.com> > >Subject: [RBW] Super-spongy brakes on my AHH - any help? > > >Wow, I'm not having much luck in the brake department with my new > >ride. I set up my Hilsen with Silver brakes and found that they > >simply wouldn't stop me - I could have both levers to the tape and > >still roll. So, I changed to Paul Racer's on the advice of my LBS and > >found that the situation really isn't much better. Here is where my > >thinking is at: > > >* I'm seeing a lot of flex in the brakes themselves and at the cable > >hangers. The rear brake is worse than the front (as is usually the > >case) but I suspect the inline barrel adjuster and the rear cable > >hanger (light-weight aluminum one that hangs of the seat-post bolt) is > >flexing too much. > > >* I've brought the yokes up pretty high - I can get them higher, but > >not much. So, I'm not certain this is the problem. > > >* Brake-pads are the standard black Kool-Stops and I would have to > >assume they are not the problem > > >* My Dura-Ace brake levers are incredibly squishy. This is one piece > >of the equation that is common to both setups (Silvers & Racers). The > >Racer brakes are indeed short-pull so those road levers should be fine > >- but I've suspected them before. > > >Another mechanic took a look at the brakes and road the bike today. > >He agreed that the brakes are massively under performing. He thought > >that a "travel agent" might help to pull more cable. He also wanted > >to re-cable since I cut the rear cable a little short. He wanted me > >to find out if Paul makes a stiffener that attaches to the calipers. > > >Does anyone have any other ideas for me? I don't have another AHH to > >ride, so it is hard for me to know just how bad my brakes are. Keven > >at Rivendell didn't think the Racer's are much better than the Silvers > >for braking (and he has a pair on his Hilsen) and so he wondered what > >the other problem might be. > > >Any help would be greatly appreciated. > > >Thanks, > >Adam > > >-- > >You received this message because you are subscribed to the Google Groups > >"RBW Owners Bunch" group. > >To post to this group, send email to rbw-owners-bu...@googlegroups.com. > >To unsubscribe from this group, send email to > >rbw-owners-bunch+unsubscr...@googlegroups.com. > >For more options, visit this group > >athttp://groups.google.com/group/rbw-owners-bunch?hl=en.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
