Not sure what rack those might fit, but I did attach a Nitto M12 Front Rack to my Canti-Rom recently; it's basically a Mark's / Mini-front that mounts to canti studs instead of the fork braze-ons. Rene' Herse has the dual-light version for not too much scratch ($80).
Andrew On Jan 13, 2011, at 4:50 AM, Frederick, Steve wrote: > This raises a question I've been ponderin' for a while. Does Nitto offer > mini-rack style canti-mount struts for the Mark's rack? I've seen some made > for the Campee rack but they're likely too short. Here: > > http://www.benscycle.net/index.php?main_page=product_info&cPath=146_240&products_id=7978 > > Steve > > >> -----Original Message----- >> From: rbw-owners-bunch@googlegroups.com [mailto:rbw-owners- >> bu...@googlegroups.com] On Behalf Of Thomas Lynn Skean >> Sent: Tuesday, January 11, 2011 11:29 AM >> To: RBW Owners Bunch >> Subject: [RBW] Re: Nitto Mark's Rack Hardware >> >> The RBW web site has lots of useful information how to install a Mark's Rack. >> It has pictures which include all of the hardware the rack originally came >> with. >> And it has pictures of the rack installed in various ways. >> >> http://www.rivbike.com/products/show/mark-s-rack-nitto/20-108 >> >> They also sell spares that you may need, including special Nitto vibration- >> resistant strut-attaching nuts/bolts/collars that I've never seen anywhere >> but >> from Nitto. Whether they have any in stock is always a question. >> >> http://www.rivbike.com/products/show/nitto-rack-hardware/20-077 >> http://www.rivbike.com/products/show/nitto-band-clamps/20-016 >> >> The hardware is not particularly cheap. But the only things I've seen "ready- >> to-use" substitutes for in hardware stores are the normal- looking >> nuts/bolts/washers that connect the "diving board" to the rack platform and >> to the fork crown hole (all metric, which means not very common... and >> stainless metric is less so, though my local Ace has >> *some*) and the "band clamps", which are sometimes referred to as "P- >> clamps" (though even those are hard-ish to find in stainless steel). >> >> Hope this helps. It's not complicated when you're looking at everything. But >> I >> do find it complicated to talk about in the abstract. >> >> Good luck! >> >> Yours, >> Thomas Lynn Skean >> >> On Jan 10, 8:33 pm, Jon Flaxman <jonflax...@gmail.com> wrote: >>> Greetings all from snowy Arkansas (!) >>> >>> The PO of my new-to-me Canti-Rom didn't pack the loose parts carefully >> and as such, I am now missing the mounting screws for the Mark's Rack. >>> >>> Anyone gave some spare parts hanging around, or know of the Home >> Depot alternatives? I'm at a disadvantage, as I've never seen one if these >> racks so I'm not sure what all is missing. I just know that I have a rack >> and no >> nuts or spacers or whatever. >>> >>> Thanks! >>> >>> Sent from my iPhone >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To post to this group, send email to rbw-owners-bunch@googlegroups.com. >> To unsubscribe from this group, send email to rbw-owners- >> bunch+unsubscr...@googlegroups.com. >> For more options, visit this group at http://groups.google.com/group/rbw- >> owners-bunch?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.