I use a roto-tool (Dremel) with a cutting blade because I can do it without having to remove the stays from the bike again, as other have said. Then, I put a cylindrical sharpening stone into the Dremel and use the convex end of it to smooth the sharp edges of the cut stay. Also, when doing the cutting I hold the thin blade of a putty knife between the stay and fender so the cutting blade does not gouge into the fender when it's gone through the stay.
On Apr 3, 12:56 pm, Lemon <davidboydle...@gmail.com> wrote: > For those folks who use SKS Fenders, what tool do you use to trim/cut > the ends of the stays after you get the installation dialed in? > Something other than a saw, perhaps? Thanks for your input. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.