I would have sworn that my shifters came with both styles. In any case I would expect any good bike shop, or Riv, has a pair of these in its spare parts drawer, that not that rare since they were on virtually every road bike, with bar ends, sold for many decades. There's more than one size floating around out there and shops that service older bikes are sure to end up with them.
michael On May 17, 10:20 am, jandrews_nyc <jasonaschwa...@gmail.com> wrote: > I should've read the posts regarding this before I purchased SIlver > downtube shifters to use with my Shimano bar end shifter pods. > As many of you know the shifters come with a round washer with a > square hole that has a little tab on it that acts as a shifter stop > when mounted on a downtube boss. > But..it seems nobody sells the round washers with the square hole > WITHOUT the tab. > I could grind it down, but does anyone know how to get the correct > washers without purchasing the bar end shifters? > thanks > Jason -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
