Religiously following this protocol you will eventually end up with a 48" (and very skinny) diameter wheel.
Patrick "taffy-brain" Moore On Fri, Sep 23, 2011 at 1:00 PM, Rex Kerr <[email protected]> wrote: > > On Friday, September 23, 2011, PATRICK MOORE wrote: >> >> The wheel will tend to stretch into an ellipse after several months of >> doing this. > > The solution is to go out and rotate the wheel by one spoke slot each > morning... alternatively rotate to the opposite side, then split the > difference, then the opposing side, then split that difference, then > the opposing side, narrowing the angle as you go, much like tightening > lugnuts on a car. :-) > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW http://resumespecialties.com/index.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
