I have a Ram with 33mm Jack Browns and 45mm VO stainless fenders. A bit of a pain on the install (a couple hours on install, some dremel work and tweaking) but fits well. I did get the Silver brakes for additional muscle (rather than room) and this probably makes a difference.
My $.02 is you can get 32/33 tires under you w/Ram/Rom as long as you go long reach brakes, are patient and have faith that it will all work. Lastly the VO fenders are a great look w/Riv but their stays (at least w/the single eyelet bolts) rattle like hell out of the box. I ended up wrapping the eyelet bolts with the same hemp twine Riv sells for the handlebar wrap. This also keeps the fender stable by keeping it from shifting/twisting as you go over bumps. Much better results after this last touch. Bruce On Jan 5, 4:38 am, Michael Hechmer <mhech...@gmail.com> wrote: > I will second both of Etaban's posts. The Ram/Rom was designed as a road > bike. They are great brevit bikes but the design point is definitely 28mm > & fenders and that is where the bike will give you its best. I'm sure I > could run 30s under my Honjo fenders, but don't think 28 to 30 or to drive > the choice. > > michael -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
