I think I just packed out the recess for the bolt head with presta value nuts (or similar) and then installed the Pitlock. IIRC, the tightening nut for the Pitlock is independent of the housing that contacts the frame, so I suppose there should be very little, if any, marring.
-Jay On Tuesday, September 18, 2012 12:35:00 PM UTC-4, lungimsam wrote: > > The pitlock bolt head doesn't go into the seatpost clamp recess for the >> bolt head, I think, from a pic I have seen online. >> > > Does it mar the finish when tightened onto the lug? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/v8ScGgLJuGkJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.