Like Joe said, from the bolt out to the middle of the bar clamp along the extension. I thought I remembered that Nitto measured differently but my Cinelli stem measures the same. Maybe it was just the Nitto Pearl that measured differently...
On Sunday, October 28, 2012 7:01:26 PM UTC-6, MobileBill wrote: > I'll pass along this piece of advice: For those who put high mileage on > triples, you might find your middle chainring showing excessive wear rather > too frequently. After wearing out two chainrings, I bought the stainless > steel chain ring from Surly and couldn't be happier. No ramps, no pins, and > no problems: Not sure shifting aids are even needed on a triple, > particularly with friction, and I certainly can't tell the difference. > And here's the advice I need: How eactly do you measure a nitto stem while > it's still on the bike? I've finally decided to try shortening mine, but > not much, so I need to know exactly what stem length I have on there now. > (I;ve read the internet comments on this, which make me considerably less > certain I'm measuring correctly). > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/lzkaJVPJmD4J. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
