After destroying a couple of the spikes I gave up and bought a tap to cut threads into the drilled holes. That made the spike installation much easier. Place a drop of blue Locktite on them before installing.
On Thursday, February 7, 2013 10:57:38 PM UTC-7, Michael Williams wrote: > > Hey Group, just wondering if anyone has any experience with the spikes > that Rivendell sells that you can put into the Grip Kings. I drilled out > a hole with a 7/64 bit which is right between the recommended 3/32 and 1/8 > and tried screwing one in but it just didnt want to go. Then I drilled > that same hole with a 1/8 bit and it still wouldnt budge. I thought I > was going to break/bend my little 2mm Hex key. Am I doing something > wrong? thanks in advance. -Mike -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
