There is a hole on the bottom of the edelux, The power lead comes out of there. You need to completely heatshrink around a 2.8mm plug so that it doesn't ground to the Edelux's frame.
For the ground the Edelux should have come with a ring terminal that can ground to the outside of the Edelux's budy when it is bolted to whatever attachment point you choose. According to the instructions the ground is not required. See the instructions located here : http://www.nabendynamo.de/produkte/pdf/english/Montage_Edelux_e.pdf Stephen On Saturday, September 21, 2013 7:06:00 AM UTC-7, Patrick Moore wrote: > > The Edeluxe has no second cable for the rear lamp, as does the Cyo: just > one that runs to the prongs on the hub. The Toplight Line Plus has two > prongs, one for power, one for ground. I suppose I attach the "ground" to a > wire running to bare metal on the frame, but how do I attach the power wire > to the hub? Do I have to run the wire directly to one of the SON (20R) > prongs? > > Thanks. > > -- > *RESUMES THAT GET YOU NOTICED!* > Certified Resume Writer > http://resumespecialties.com/index.html > [email protected] <javascript:> > http://www.linkedin.com/in/patrickmooreresumespec/ > > Albuquerque, NM > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
