Chris, You *can* measure below the droplet level, very easily and precisely. Proceed as follows: 1. Measure out 1 or 2 or 5 ml of resin into a graduated container. 2. Add one drop of dye; mix thoroughly. 3. Pour off some easily-measured fraction of the tinted resin into your resin mixing batch. Cover the tinted-resin container for later use.
Voila! If you poured off 1/5 of the tinted stuff, you have 1/5 of a drop of dye, to the precision of your measuring cup or shot glass or plastic medicine cup. Regards, Steve On Mar 6, 4:56 pm, odysseyslipw...@aol.com wrote: > well the sample spot of resin i mixed is about cured, and it's just black > (or just a shade lighter than black), so i took another bottle, poured more > of > the part b into it and this time started with one drop of dye .......... > > it'll have to do as there is no way i can measure the dye any smaller than a > droplet. it's not a bad shade of gray, but as i am tinting the resin by > droplets, i am sure there will be slight color variations between some links > - so > be it ................ > > i'll take a picture in about a week or so of some links mounted to the > attachment chain (might not look like too many as i have 3 molds for the > treads > and 2 for the guides at this time and i need the guides for mounting the > links) > > Chris, > _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) > **************A Good Credit Score is 700 or Above. See yours in just 2 easy > steps! > (http://pr.atwola.com/promoclk/100126575x1219957551x1201325337/aol?red... > %3D62%26bcd%3DfebemailfooterNO62) --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
