Chris,
I still have the tranny from the Comet. It's all 35 pitch but
you could change out the gear to the motor so it will match the 25
pitch on your motors. Then you could use a 9 ,10, or 11 tooth 35
pitch gear on your 3/4" axles. Let me know if your interested and we
can work out a price.The clamps on the EV,s might even work for your
scooter motors. What diameter are they?
John" too much in the basement" Pittelli
On May 4, 12:44 am, [email protected] wrote:
> In a message dated 5/3/2009 7:31:41 P.M. Eastern Daylight Time,
>
> [email protected] writes:
>
> what motors are you using? If you haven't got them yet, look at
> gearing pre-geared M01's or similar, this will let you go a 9/10/11 on
> the geared motor and a 13 or so on the shaft
>
> if you already have non-geared motors and this is why you're looking
> at the gearing tranny, you may need to build a three or more stage
> tranny to allow for small sprocket fitment on the shaft
>
> i'm using 24v 350w reversible scooter motors and have worked out a small
> gear down trany using 25 pitch chain. not looking at the drawings, i think i
> have it going from the sprocket on the scooter to a 24 tooth, on the same
> shaft another 12 tooth that runs to another 24 tooth and on that same shaft
> another sprocket that would drive the sprocket on the axle. all of that i
> had worked out, it just depends on the sprocket i put onto the axle giving
> me my final reduction that will change the last sprocket in the trany.
>
> i had these motors before the M-01's or i would have just bought them.
>
> i just wanted to see how many may have run into this problem while
> designing their tank
>
> Chris,
> _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html)
> **************2009 3 Free CREDIT SCORES: See Your 3 Credit Scores from All
> 3 Bureaus FREE!
> (http://pr.atwola.com/promoclk/100126575x1221797372x1201397989/aol?red...
> tAndScore.aspx%3FID%3D91831F371F138345B53A153F49D4D872%26siteid%3De927580bf7
> )
--~--~---------~--~----~------------~-------~--~----~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
-~----------~----~----~----~------~----~------~--~---
