Darn company blocked Photobucket now....oh, and they blocked the
rctankcombat.com website too.

Derek

On Sun, Jul 31, 2011 at 2:43 AM, Chairman Miaow <pureteenl...@hotmail.com>wrote:

>
>
> Since I am on call this weekend and cannot do anything other than hang
> around the house waiting for something on the motorway to break, I
> went back into the garage and rebulit the steering on the Morris;
>
> http://i156.photobucket.com/albums/t6/pureteenlard/Morris/newsteering.jpg
>
> I have cut away the nylon steering arms and replaced them with
> fabricated alloy ones and in doing so have changed the ackermann
> angles from 'oh my god noooooo' to 'hmmm . . . doesn't look too bad'
>
> Steering system rebulit I moved on to making a working facsimile of
> the War Department Patented Rear Bogie. While I was doing this I was
> reminded of the old maxim "Measure twice, cut once", when I ended up
> drilling six holes instead of the four that were required. Never mind,
> you have to look very closely to spot the cock-up. Anyway, a couple of
> hours later and one side was done.
>
> http://i156.photobucket.com/albums/t6/pureteenlard/Morris/WDbogie2.jpg
>
> The axles are sprung against each other than the springs are free to
> rotate about their anchorage. The axles are mounted between the ends
> of the two sets of springs and are able to move over quite a large
> angle, hopefully, keeping the four driven wheels on the ground.
>
> http://i156.photobucket.com/albums/t6/pureteenlard/Morris/WDbogie1.jpg
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to