First testdrive-With a werry bad nokia phone kamera: http://www.youtube.com/watch?v=yJlNC29xDcI Now i will go flying RC planes for the sommer-And continiue my tank at the winter agin Den fredag den 26. april 2013 17.45.51 UTC+2 skrev Niels Erik Kristensen:
> Now a littel chance in my plans for my tank!! The watercooling are out! > The ESC`s that i want to use are not good enough, so now i will use ESC`s > from cars-With reverse :-) > The problem are that the Boat esc`s that i have, dont have propotional > reverse funktion-They just give full trottel when i will go reverse-I can > chance that down to 25% full trottel-But that are not sutabel for a tank. > That "mal"funktion, cost me my first damage to my tank :-( In a motor > test, outside, the tank sudently go full reverse in to the wall! But > damage where small: the front aksel bent a littel (about 3 mm) I can fix > that-No damage to the hull :-) and then the rear spocket, that are sitting > on the rear main aksel, got loose. The spocket are secured to the aksel > with 3 ps. of 5mm bolts, all countersunk about 2 mm into the aksel-They all > got 2mm shorter!! I think there are alot of power in my motors. > Den tirsdag den 23. april 2013 07.03.38 UTC+2 skrev Niels Erik Kristensen: > >> The motor mounts are not redy yet, they will have a top on too-With a >> 60mm fan, for cooling. >> The top are 6mm plywood, and i use epoxy to glue it on with. >> Den tirsdag den 23. april 2013 04.33.58 UTC+2 skrev tan...@gmail.com: >> >>> Please don't take this as being critical because I think you are doing >>> an excellent build. Just keep an eye on those motor mounts. They look a >>> little weak. If they start to flex at all, you will want to make them >>> stronger. Any flex will eventually lead to breaking. Had it happen to me >>> in my M113 build. >>> >>> Derek >>> >>> >>> On Mon, Apr 22, 2013 at 4:14 PM, Niels Erik Kristensen <ne...@live.dk>wrote: >>> >>>> Update from Denmark!! I got my transmision redy, and 1 motor running-I >>>> only got 1 ESC for the moment, the other one are delayed in Chinise mail >>>> :-( >>>> The ESC are not set right, at the moment, first i have to download the >>>> manual-I forgot it today. >>>> But one motor are running and are looking good so far. >>>> http://www.youtube.com/watch?v=3AcCV3T5HVs&feature=youtu.be >>>> http://www.youtube.com/watch?v=LWcgQg4f8wU&feature=youtu.be >>>> Den tirsdag den 9. april 2013 13.18.53 UTC+2 skrev Bill Byrnes: >>>> >>>>> That section can be placed right next to the "What everyone expects >>>>> from Neil" section. It will include all the criticisms we have of Neil >>>>> (constructive of course). If necessary, we can expand that section onto >>>>> another internet server if the present capacity limit is reached. >>>>> >>>>> Bill "Can hardly wait for my leader's instructions" B >>>>> >>>>> *From:* Neil Rochford <funky...@ntlworld.com> >>>>> >>>>> I might ask Frank to open a new section of the site called "What Neil >>>>> expects" I have been spending large amounts of time teaching pre teenage >>>>> tankers and as a consequence my manner maybe becoming somewhat >>>>> condescending. Id like nothing more than to introduce such a regime to >>>>> rctankcombat, whereas anyone lacking behind in construction, (in my >>>>> opinion) will become my subject for criticism. obviously in a >>>>> constructive manner, or some other manner of my choosing. >>>>> Any message dated 28th January (or any other date) predicting FTF >>>>> progress was merely a prediction and therefor can not fall within the >>>>> rules >>>>> stated above. >>>>> >>>>> Neil "Your leader has spoken you have two weeks" R >>>>> >>>>> >>>>> >>>>> On Monday, April 8, 2013 3:16:15 PM UTC-7, Niels Erik Kristensen wrote: >>>>> >>>>> Yes, and i have not forget what you wrote on januar 28!! >>>>> But you dont now me-When i say that i will do somthing-Then consider >>>>> it done :-) I especkt the motors to be in the tank, and running, in 2-4 >>>>> weeks :-) >>>>> >>>>> Neil is pretty demanding.... :) Just kidding. >>>>> >>>>> Nice work. >>>>> >>>>> Derek >>>>> >>>>> >>>>> -- >>>>> -- >>>>> You are currently subscribed to the "R/C Tank Combat" group. >>>>> To post a message, send email to rctank...@googlegroups.com >>>>> To unsubscribe, send email to rctankcombat...@**googlegroups.com >>>>> Visit the group at http://groups.google.com/**group/rctankcombat >>>>> >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "R/C Tank Combat" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to rctankcombat...@**googlegroups.com. >>>>> For more options, visit https://groups.google.com/**groups/opt_out. >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>> -- >>>> You are currently subscribed to the "R/C Tank Combat" group. >>>> To post a message, send email to rctank...@googlegroups.com >>>> To unsubscribe, send email to rctankcombat...@googlegroups.com >>>> Visit the group at http://groups.google.com/group/rctankcombat >>>> >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "R/C Tank Combat" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rctankcombat...@googlegroups.com. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> >>>> >>> >>> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.