I might have 2 sprockets for you. We cut a few extra a while back. Let me see if I can locate them for you.
John " parts supplier to the world lol "' P. On Friday, April 4, 2014 2:35:17 PM UTC-4, lotus7 wrote: > > Hi everyone, > > just joined and have alot of reading to do! Have started building my > 1/6th ish scale T34/85.Got a second hand rc system and my motors are two > 24volt 350watt gear reduction model MY101. > > If I may ask a few questions(prior to my searching the forum)? > > 1.Anyone sell motor controllers for variable speed operation? (would > rather not go "maryland attack group control" with relays and stop/go > control)but I would need a ready to use set up as my electronic skills are > not the best > > 2.Anyone sell sprocket size #35- tooth drive sprockets to replace MY101 > motors 9 tooth #410 sprocket? (worst case I can buy 2 #35,9 tooth 3/8" > bore and take then to a machine shop for bore to be corrected and keyway > cut. > > 3.How bad is it to install the motors end to end? i realize there is a > small difference in rpms when you have one motor reversed compared to the > other > > thanks in advance, > > > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.