Forgot, just need two flat pieces of metal.
On Wednesday, August 13, 2014 6:54:51 PM UTC-4, jvragu47 wrote: > > Just looks like a simple v attachment. Attach the open end of the v to > the gun carriage. Then, drill a hole in each end for the center of the > turntable. Just need a bolt and a bushing then.. No welding required at > then. > > > Tuesday, August 12, 2014 9:12:27 PM UTC-4, Caleb Smith wrote: >> >> Do you think the wheels will keep centered on the base without the piece >> that goes from the gun frame to the turntable? That was the piece I >> originally thought I was going to need the welder for. >> On Tuesday, August 12, 2014 7:12:15 PM UTC-4, jvragu47 wrote: >>> >>> >>> >>> On Monday, August 11, 2014 7:00:27 PM UTC-4, Caleb Smith wrote: >>>> >>>> Why didn't I see that before! Looks simple enough to make. That >>>> little frame might be a little more difficult to make. Might have to >>>> brake >>>> out the welder... >>>> >>>> Or, for now how about this. Large piece of plywood base and then maybe >>>> a 1/2" thick plywood circle in the center for the tires to roll around. >>>> No welding required. >>>> >>> >>> John P >>> >> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
