Jim, August,

I like the Wiley clips the best as well after using zip ties and other
products over the years. The challenge I found with Plastic is it does not
last over the long haul and of the many styles I've used none have performed
better. The clips hide the cable cleanly and securely and will last as long
as the system.

Jason

On Tue, Dec 2, 2008 at 5:38 PM, August Goers <[EMAIL PROTECTED]> wrote:

> Jim -
> I haven't used the Thomas & Betts product you found but we've had excellent
> results with the Wiley Acme Cable Clip found here:
>
> http://www.we-llc.com/ACC.html
>
> We use these clips on all our installations these days and it has allowed
> us to get almost completely away from zip ties. I don't trust zip ties over
> the long haul.
>
> Let us know what you think of the Thomas & Betts product if you end up
> using it.
>
> -August
>
>
> August Goers
>
> Luminalt Energy Corporation
> 4000 Irving Street
> San Francisco, CA 94122
>
>
> Office: 415.564.7652
> Mobile: 415.559.1525
> [EMAIL PROTECTED]
> www.luminalt.com
>
>
> ------------------------------
> *From:* North Texas Renewable Energy Inc <[EMAIL PROTECTED]>
> *To:* RE Wrenches <re-wrenches@lists.re-wrenches.org>
> *Sent:* Tuesday, December 2, 2008 3:30:56 PM
> *Subject:* [RE-wrenches] (no subject)
>
> Wrenches
> I'm proposing a ground mounted PV installation that will have the usual
> exposed DC conductors and so need to be secured into a raceway of some sort.
> I stumbled across this Thomas & Betts cable tying system which looked like
> it would work well for neatly securing long straight runs of one or more
> conductors attached behind a raceway or inside the module frame.
> Has anyone tried this method of mounting long or short wire runs?
> The Deltec plastic  is rated as very good UV resistance. T&B Part numbers
> are TCP5255, TYDLH, TYD50R
>
> http://www-public.tnb.com/shared/inst/ta00903-tb2.pdf
>
> Thanks as always
> Jim Duncan
> North Texas Renewable Energy Inc
> 817.917.0527
> [EMAIL PROTECTED]
> www.ntrei.com
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Jason Lombard CSBA
Open Hand Solar LLC.
Pecos, NM. 87552
505 795 8646
[EMAIL PROTECTED]
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to