I have not used the QMPV system on flat tile, and I wanted to suggest Tile Trac if you do one again. It is much easier and only a small 3/8" hole to drill which equates to less leakage problems.
Just my 2w. On Sun, Dec 7, 2008 at 9:09 PM, Kelly Keilwitz, Whidbey Sun & Wind < [EMAIL PROTECTED]> wrote: > Hi All, > Anyone use the Quick-Mount PV system for tile? We don't do many tile roofs, > but we have an upcoming job with flat cement tiles. In the past we've > pulled > the tiles, placed posts and flashed, cutting the tile to fit. It's a pain. > The Quick Mount PV system, www.quickmountpv.com, replaces a tile with a > exact-fit plastic flashing with integral flange that goes over the post. It > sounds like it'll save a lot of time - if it works. > Thanks, > -Kelly > > Kelly Keilwitz, P.E. > Whidbey Sun & Wind, LLC > Renewable Energy Systems > NABCEP Certified PV Installer > 987 Wanamaker Rd, > Coupeville, WA 98239 > PH & FAX 360-678-7131 > [EMAIL PROTECTED] > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > -- Jason Lombard / CSBA Open Hand Solar LLC. Pecos, NM. 87552 505 795 8646 [EMAIL PROTECTED] "I'd put my money on solar energy… I hope we don't have to wait 'til oil and coal run out before we tackle that." —Thomas Edison
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
