Thanks, Mark~ Did the T-tap device ever materialize? You had written about this as a way to get power onto the Xanbus network if an inverter/charger was absent from the system.
I think part number 865-1057 had been assigned. Please advise if this can now be ordered through distributor channels. Mick Abraham, Proprietor www.abrahamsolar.com Voice: 970-731-4675 ---------- Original Message ----------- From: "Mark Edmunds" <[EMAIL PROTECTED]> To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org> Sent: Wed, 10 Dec 2008 09:07:39 -0800 Subject: Re: [RE-wrenches] XW connection to PC? > Hi All yes the XW Gateway unit is shipping, and givesyou either a wired or > wireless connection to a local Ethernet network. The XW-Configtool is also > available and provides a USB connection and software for set up andmonitoring > via a PC. (I dont think the Config tool is on the web siteyet, but can be > ordered through the tech support group) > > The built in com ports on the XW system devices use CAN bushardware, with a > proprietary communication protocol, so either one of the abovedevices is the > best way to make your connection from this to a computer. > > Cheers, > > Mark > > > Mark Edmunds > Xantrex Technology Inc. > > > From: [EMAIL PROTECTED]:[EMAIL PROTECTED] On Behalf Of mickabraham > Sent: Wednesday, December 10, 2008 7:25 AM > To: RE-wrenches > Subject: Re: [RE-wrenches] XW connection to PC? > > Here's a link to follow: > > http://www.xantrex.com/web/id/269/p/1/pt/5/product.asp > > I do not know if the Communications Gateway is shipping or not, but it's > closeanyway. > > Mick Abraham, Proprietor > www.abrahamsolar.com > Voice: 970-731-4675 > > ------- End of Original Message -------
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
