Hi, a client's rodents recently chewed up their SWI sync cable. I found that the Trace connectors can be opened carefully, then reused with new ribbon cable.
20 conductor ribbon cable was not available in my podunk town but I had some 10 conductor ribbon with the correct spacing (.1 inch if I recall correctly). I just used two lengths of that. Small amounts of this material can be purchased from model railroad hobby stores, since some of the fancy new toy trains use this for communications. The #1 conductor in the ribbon has a red color indicator but I can't remember if this is crossover or straight through. I just followed the pattern on the chewed up cable. I think the actual connectors are the same as for a computer parallel printer. I squeezed the connector down onto the ribbon cable using a bench vise to apply even pressure, and the connector pierces the ribbon insulation as it closes. A shop that builds custom computer cables could probably fab an assembly for you...if I had done a better job here of explaining all the specification details. I furnished plastic wire loom as part of the rebuilt assembly for my customer...hopefully in a flavor that the rodents won't like. Mick Abraham, Proprietor www.abrahamsolar.com Voice: 970-731-4675 ---------- Original Message ----------- From: William Miller <wrmil...@charter.net> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Sat, 20 Dec 2008 11:43:04 -0800 Subject: [RE-wrenches] Xantrex SWI Cable > Friends: > > I need to build a Xantrex SWI cable (the sync cable for two SW > inverters). Do any of you have the specs. for one of these? > > Thanks in advance, and happy solstice! > > William Miller > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org ------- End of Original Message ------- _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
