Quite possible they were home-made, or at least "semi" homemade in some
garage "factory".
The fact that they apparently used some kind of non-bonded plastic sheet to
cover the cells instead of glass tells me it was a low-budget, low tech
panel.
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
----- Original Message -----
From: "Travis Creswell" <tcresw...@ozarkenergyservices.com>
To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org>
Sent: Wednesday, February 11, 2009 12:31 PM
Subject: Re: [RE-wrenches] Panel Fire
Yeah, spooky pictures. Certainly that was non-glass glazing. I can make
out a way too unsecured wire at the top left of the array but that might
have been secured before the conflagration event.
Could these panels have been "home made" by someone in their garage? I
regularly loose cells for sale on E-Bay and in the back of home power.
Someone's buying them.
Travis Creswell
Ozark Energy Services
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org