Eric, We had one go through after having a PE redo and sign off on our electrical schematic, but I suspect it's kind of random over there at the IRS. Good Luck, Bob-O Electron Connection, Inc PO Box 203 Hornbrook, CA 96044 800.945.7587 fax 530.475.3401
On Mar 2, 2010, at 4:33 PM, Eric Andrews wrote: Has anyone worked through the process of getting their customer a federal grant in lieu of the tax credit? (supplying more of the endless paperwork to the accountant) One of the requirements is that a PE stamp the design. The requirement is vague and it does not say what kind of PE or systems over X size. The IRS Q & A folks aren’t giving a clear answer. The only time we normally use a PE is for structural (design loadcalcs.) purposes. These are not large utility sized systems. Eric R. Andrews NABCEP Certified PV Installer Eco Solar, Inc. www.ecosolarnow.com PO Box 5194 Klamath Falls, OR 97601 541-281-8252 cell 541-273-3200 office mailto:e...@ecosolarnow.com
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
