How is the plywood attached to the foam? jay peltz power On Jul 19, 2010, at 7:50 AM, Glenn Burt wrote:
> Can you see where the rafter tails were nailed at the soffit? > How is the ridge constructed? A vent you could lift to see the ridge end of > the rafters? > > Good Luck! > -Glenn Burt > > -----Original Message----- > From: re-wrenches-boun...@lists.re-wrenches.org > [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of > hol...@sbcglobal.net > Sent: Monday, July 19, 2010 9:59 AM > To: RE-wrenches > Subject: [RE-wrenches] Foam Insulation Install > > For residential install with the spray foam insulation > > Underside of deck has 12"+ of foam.....no way to accurately locate rafter > there.....hammer and ear also out of the question...........don't think any > of the stud finders will work....been told that peeling back shingles to > locate rafter is only accurate way.......would like to avoid that if > possible..........any suggestions? > > Holt E. Kelly > Holtek Fireplace & Solar Products > 500 Jewell Dr. > Waco TX. 76712 > 254-751-9111 > www.holteksolar.com >> >>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
