http://www.currentcost.net/monitor.html
Gary - I am going to try this based on recommendations here on the list. I ordered a dual set up to monitor load on a critical load s panel and production to the utility. Thanks, Dana Orzel Great Solar Works, Inc E - [email protected] V - 970.626.5253 F - 970.626.4140 C - 970.209.4076 web - www.solarwork.com "Responsible Technologies for Responsible People since 1988" -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary Easton Sent: Monday, August 09, 2010 5:43 AM To: RE-wrenches Subject: [RE-wrenches] metering an outback system Hello, I am having trouble metering a system with an Outback 3648 serving a protected loads panel. I need a way to accurately measure the production. I have a dual stator 12s meter installed with the "AC in" coming in the bottom and out the top and the AC from the inverter going in the top and out the bottom with a neutral from the E-panel connected to the fifth leg. The meter is not reading anything close to the Outback. Any ideas would be greatly appreciated. Gary Easton Appalachian Renewable Power Systems NABCEP Certified Solar PV NABCEP Certified Solar Thermal 740-277-8498 _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
