Bob you know the architecture of the MX60 is it a design problem or is it a
component problem, I have not noticed this problem in older MX60s but I was not
looking for it either. I have been able to adjust the meter and I typically
would not check it again. I use my meter and adjust the MX60 to read the same.
Again did Outback change suppliers? or was this problem always there?
Darryl
--- On Thu, 8/19/10, boB Gudgel <b...@midnitesolar.com> wrote:
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
